Labconco 9000530 WaterPro PS Polishing Station, General Chemistry Model, <10 ppb TOC, Type 1 Standard, 230V, Schuko Plug

The Labconco 9000530 WaterPro PS-series water purification system produces Type 1 standard water for use with general lab procedures and inorganic analysis applications. The system uses deionization and carbon filtration and requires a deionization resin cartridge and carbon filter kit (both sold separately). The unit has a 304 stainless steel front panel and a powder-coated steel cabinet. The LED display shows water resistivity in megohms, water temperature, and timed-dispense setting. The system requires potable water pretreated by reverse osmosis, ion exchange, or distillation. It has an inlet water pressure range of up to 100psi. The system replenishes at up to 1.8 liters per minute (LPM) and the dispensed water has up to 18.2 megohm-cm resistivity. A built-in boost pump recirculates treated water to maintain water purity. It accepts 230V, 50Hz input power and has a Schuko plug for international use. This general chemistry model polishing station has a CE mark for compliance with European Economic Area conformity standards.SpecificationsResistance18.2 megohm-cmTotal organic carbon (TOC)Less than 10ppbPurification typeDeionization and carbon filtrationFlow rate1.8LPMFeed water pretreatment requirementsPotable water pretreated by reverse osmosis, ion exchange, or distillationFeed water pressure rangeUp to 100psiDisplayLEDInput power230V, 50Hz, 2.5APower plugSchuko, InternationalStandards metCEWeight85lb.Dimensions30.1 x 31.1 x 7.5 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Labconco Corporation manufactures laboratory furniture and equipment such as hoods, ventilated enclosures, and glassware washers for general laboratory use. The company, founded in 1925, is headquartered in Kansas City, MO.

• WaterPro PS-series Type 1 water purification system for use with general lab procedures and inorganic analysis applications
• Requires deionization resin cartridge and carbon filter kit (both sold separately)
• LED display shows water resistivity in megohms, water temperature, and timed-dispense setting
• 230V, 50Hz input power with Schuko plug for international use
• CE mark for compliance with European Economic Area conformity standards