HARFINGTON 2 PCS Morse Taper Drift Key Carbon Steel Drill Chuck Sleeve for MT1-MT2 Removes Morse Taper Adapter

1. Made of carbon steel with high wear resistance and high hardness.2. The surface is finely ground and can be easily installed and removed on the morse taper adapter hole.3. The taper handle is a tool with a triangular cross-section. It is often used to separate or disassemble two interconnected or embedded objects, such as disassembling the morse taper center sleeve connected to lathes and drill press accessories.4. Correctly select the appropriate wedge iron size and angle. When using it, you need to pay attention to the insertion direction and check whether it is tight.

• Size - 5.4*24.6*6mm (Minimum width*Maximum width*Thickness),3.67*19.7*5mm (Minimum width*Maximum width*Thickness), Total Length: 190mm / 7",140mm / 5.5".
• Material - Morse taper drift made of carbon steel with high wear resistance and hardness.
• Feature - Adopts an overall quenching process and has strong impact resistance. The surface is precision ground for easy installation and removal on Morse taper adapter holes.
• Application - The taper handle is a tool with a triangular cross-section. It is often used to separate or disassemble two interconnected or embedded objects, such as disassembling Morse taper rods connected to lathes and drill press accessories.
• Note - Correctly select the appropriate wedge iron size and angle. When using it, you must pay attention to the insertion direction and check whether it is tight.